Fire Extinguishing Aerosol Generator AGS-2/4

Designed to generate a mixture of gas and aerosol, a necessary volumetric concentration which stops the flame from burning.

AGS-2/4 is resistant to vibration, and is therefore recommended for the protection of vehicles. It is also used in areas of average volume. AGS-2/4 has a number of modifications in types of attachment and the direction of aerosol spray.

Question to purchase

Description

The AGS 2/4 is cylinder-shaped with a metal case, and has a nozzle cap on the exterior. Due to the contact cooler inside the body, it has a low temperature aerosol spray.

Principle of operation:

By applying an electrical pulse to the activation unit that is installed inside the generator, the aerosol charge is ignited. Combustion products passing through the cooling unit, exit through the nozzle on the cover of the generator and enter the protected area.

Manufacturer's warranty:

The manufacturer guarantees the generator agrees with the Russian National Standard technical requirements if the consumer abides by the instructions specified in the instruction manual.

The warranty period for the generator - 18 months.

Utilization period - 5 years.

Lifetime - 10 years

Activation units

UST-7.5

* Type of the activation unit selected by the customer and installed in the generator

Certificate (AGS-2/4) (Print)

Instruction manual

Specifications

Maximum protected volume in sealed room (d * <0,001 m-1)	21 m³
Curb weight of the generator	5,1 kg
Weight of the aerosol charge	1,7 kg
Working time	40 minutes
Dimensions
Diameter	167 mm
Height	180 mm
Activation unit	UST-7.5
Resistance of the activation unit	7,8±0,8 ohm
Minimum start-up current	1.5А
Starting voltage	12
The duration of the trigger pulse	not less than 2.0 sec
The inertia of the generator	< 2,0 sec
Operating Conditions
Operating Temperature Range	± 50 °С
relative humidity at 25 ° C.	98 %
mechanical influences (in the frequency range up to 100 Hz)	1g
Classes of fire-fighting

Modifications

AGS-2 / 4-1-1-1
Aerosol exits through the generator axis. Mounted on stand.

AGS-2 / 4-2-1-1
Aerosol exits through the generator axis. Mounted on flange.

АГС-2 / 4-1-2-1
Aerosol exits through the generator axis. Mounted on stand.

AGS-2 / 4-2-2-1
Aerosol exits through 360* perimeter. Mounted on flange.

AGS-2 / 4-1-1-2
Aerosol exits through the generator axis. Mounted on stand.

AGS-2 / 4-2-1-2
Aerosol exits through the generator axis. Mounted on flange.

АГС-2 / 4-1-2-2
Aerosol exits through the generator axis. Mounted on stand.

AGS-2 / 4-2-2-2
Aerosol exits through 360* perimeter. Mounted on flange.

Photogallery

Articles

Fire extinguishing systems in archives

In archives, libraries, book-depositories the huge mass of papers of information which represents sometimes great cultural, historical, practical value are concentrated.

Fire safety service stations

Petrol stations can be attributed to the objects with a high risk of fire due to the large amounts of combustible materials and explosive vapor concentrations. In this regard, at the gas station are increased requirements for fire safety, in particular, to equip the automatic fire extinguishing agents.

Firefighting in the boiler room

Boiler room - technical room is designed to heat the coolant and transmission in water and heating systems. In view of the complex and explosive equipment and the use of different fuels, boilers necessarily equipped with a fire alarm system and effective fire-fighting installations.

Question to purchase AGS-2/4

With contact cooling