Flame Retardant HCA LW

One of our products is flame retardant coating for metal surfaces. It is produced by Dutch technology using raw materials of the highest quality. The flame retardant coating for metal surfaces is an effective means of fire prevention and conserves the durability of the metal properties at high temperatures.  The flame retardant creates a thermal insulation screen on the surface of metal structures. This slows down the heating of the metal. The screen protects the metal within a certain period of time in case of fire.

Flame retardant treatment of - is an effective means of fire prevention and conservation of the strength properties of the metal at high temperatures.

Our company offers the flame retardant HCA LW at an agreeable price. This coating is used successfully in more than 50 countries for the purpose of fire protection of metal structures in both residential as well as in industrial and public buildings.

Advantages:

affordable price;
high quality;
long life;
environmentally safe;

Fireproof coating, water-based fire protection of metal constructions of residential, public and industrial buildings.

Question to purchase

Description

USE:

Fire protection of metal constructions of residential, public and industrial buildings. The flame resistant cover HCA LW is successfully used in 53 countries around the world to protect a wide variety of objects: chemical plants, thermal and nuclear power plants, shopping malls, stadiums, concert halls, and more.

ADVANTAGES:

High quality. The flame resistant cover HCA LW is made only of the components of leading world manufacturers, such as DuPont, BASF, Roshal group, which ensures consistency of properties and their eligibility.

Low cost. Production of high-tech equipment to reduce product cost, so we are pleased to offer it to you at a competitive price.

Durability. The service life of fire-retardant coating - 15 years. This means that for at least 15 years you can be confident in the safety of steel structures in case of fire.

Environmental friendliness and safety. HCA LW does not contain organic solvents, so it does not harm the environment and human health. It does not emit toxic gases in case of fire. Refers to flammable materials.

Specifications

Appearance of the coating	uniform matte white
Flow rate, kg / m ²	1.7-1.9
Lifecycle	according to research by accelerated aging, carried out in our laboratory, the life of the painted surface is not less than 15 years
Shelf life	1 year in a dry place at a temperature of not less than five ^{of the} C, out of direct sunlight, and undamaged packaging.

Fire-retardant efficiency

Given thickness of metal, mm	3.4	4.17
Fire-retardant efficiency, min	45 60	90
Dry film thickness, mm	0.9 1.2	1.98
Paint consumption, kg / m ²	1.46 1.95a	3.21

Physical and chemical properties:

Thinner	water
Appearance of the painta	Homogeneous viscous mass of white
Density, g / cm ³	1,25±0,5
Viscosity (Brookfield) mPa / sec	1.3-1.35
Auto-ignition temperature	no
The minimum film forming temperature (ICC)	5 ^of> C
Complete drying of the paint film	36 hours
Number of non-volatile residue	71,0 ± 1,0 (70%)
рН	8±1
Milling degree	Not more than 40 microns
The thickness of the layer is caused to a temperature of 20 ° C.	1.2-1.4 mm
The thickness of the layer after drying	0.9-1.1 mm

Technology application

	Tool	Material	The operation for 1 m ²surface	Drying time	Flow rate, kg / m ²	Note
Surface Preparation
manual	sandblasting gun	abrasive composition for sandblasting guns	5 минут	-	depends on the degree of contamination of the surface
degreasing	rags	solvent	10-15 minutes	10-15 minutes	0.1	-
Application
	Tool	Material	The operation for 1 m ²surface	Drying time	Flow rate, kg / m ²	Note
priming 1 layer	brush, roller, airless spray	HCA PRIMER AQ	5-10 minutes	2:00	0.2-0.4	The fire retardant coating may be used without prior application of soil
staining 1st layer	brush, roller, airless spray	HCA LW	10-20 minutes	24 hours	0.8-1.2	Dependent on the thickness of the metal to be protected. See table
staining 2nd layer	brush, roller, airless spray	HCA LW	10-20 minutes	36 hours	0.8-1.2	Dependent on the thickness of the metal to be protected. See table

Photogallery

Articles

Fire-retardant paint for metal as an effective means against fire

Due to the high strength and simple fast installation metal structures are the foundation of many buildings and structures. But without additional fire protection metal bearing supports and joists of beams when heated to 500 ° C are deformed in 15-20 minutes, causing the risk of collapse of the building.

Fire protection of air ducts, ventilation and systems of smoke removal

System of ventilation and smoke removal — the extensive network of air ducts passing through all building. In case of fire this network constitutes big danger to people, property and building constructions of an object.

Flame Retardant HCA LW

Question to purchase Flame Retardant HCA LW