Products
Main : Products :: Aerosol fire extinguishers ::: With injection cooling

Aerosol fire-extinguishing generators with injection cooling

Type  Protected volume 
AGS-7-1
 
With injection cooling

Designed for generating gas-aerosol mixture at concentrations required to stop a fire. It is recommended to form fire-extinguishing systems for premises of average volumes.

Protected volume: 65 m3
 
Working time: 86 sec
 
Weight: 5.8 kg
Подробнее
AGS-7/2
 
With injection cooling

Designed for generating gas-aerosol mixture at concentrations required to stop a fire. It is recommended to form fire-extinguishing systems for premises of average volumes.

protected volume: 134 m3
 
Working time: 165 sec
 
Weight: 10.8 kg
Подробнее

The design of the fire extinguishing aerosol generators with injection cooling is extremely simple. Their outer part - metal body, interior – the mixture of pyrotechnic composition, which in the event of a fire is lit under the impulse coming from the activation unit. Once it is burning, a mist comes out of the generator through the injector, which serves as a suction of ambient air, so that the gas-aerosol mixture is cooled. Aerosol entering the fire zone suppresses a combustion chain reaction, whereby the flame is extinguished.

Aerosol fire-extinguishing generators with injection cooling can be purchased by anyone from our company “NPG Granit-Salamandra” for the use of protecting buildings and areas of various sizes from fire. Using the generators in outdoor areas is impractical since the aerosol dissipates too quickly to put out the fire.

  • Model AGS-7/1 is optimally suited for the elimination of fires in rooms with low volume;
  • Model AGS-7/2 is designed to extinguish fires on the premises of a large volume.