Designed for generating gas-aerosol mixture at the concentrations required to stop a fire.
It is recommended to form fire-extinguishing systems for premises of average volumes.
The generator is a small cylinder with a metal case, on the lateral surface of which are located the outlets in a certain order. The contact cooler inside the body of the generator allows for the creation of the aerosol stream of low temperature.
Principle of operation:
By applying an electrical or thermal pulse to the activation unit, a solid aerosol charge is ignited. Combustion products passing through the contact cooler go through the outlets of the generator in the protected space.
Manufacturer's warranty:
The manufacturer guarantees the generator to abide by the technical requirements and Russian standards if the consumer adheres to the conditions specified in the instruction manual.
The warranty period for the generator - 18 months.
Utilization Period - 5 years.
Lifetime - 10 years.
Maximum protected volume conditionally sealed room (d * <0,001 m-1) |
52 m3 |
|
Curb weight of the generator |
14.0 kg |
|
Weight aerosol charge |
3.58 kg |
|
Working time |
40 |
|
Dimensions |
||
Width |
294 mm |
|
Height |
420 mm |
|
Activation unit |
BP-7.5-7.5 VRTH |
VEE, VELTH |
Resistance of the activation unit |
7.5± 0.8 ohm |
2.5 – 4 ohm |
Minimum start-up current |
1А |
0.4 А |
Starting voltage |
8 – 30 |
1.5 – 24 |
The duration of the trigger pulse |
not less than 1.5 sec |
not less than 0.1 sec |
The inertia of the generator start |
<1.5 sec |
|
Operating Conditions |
||
Operating Temperature Range |
± 50 °С. |
|
relative humidity at 25 ° C. |
98 % |
|
mechanical influences (in the frequency range up to 100 Hz) |
1g |
|
Classes of fire-fighting |
|